v14.0.0.12 of 10.01.2020

Bug fixed: in some cases Analyzer could restart with fault if MPEG analysis is activated.
 

v14.0.0.11 of 23.03.2017

Trouble-free operating reliability improved: in case of long-term monitoring device may lost connection or reach a deadlock sometimes
DVB-C and DVB-T MER/BER performance inproved for channels with central frequency in MHz: 538.0, 586.0
 

v14.0.0.10 of 30.06.2015

SNR performance improved: feature of automatic noise measurement frequency detecting implemented. To switch option on set "auto" flag for channel in channel plan instead of defining noise measurement frequency offset manually
SNR performance improved: measurement precision under bad input level flatness improved
SNR performance improved: measurement results averaging implemented, which lead to measured results deviation decreasing
SNR performance improved: measurement range extended to 48 dB
Other non-critical bugs fixed.
NOTE!
For automatical noise measurement frequency detecting switching on update ViewRSA software to the version 2.1.19 or higher.
NOTE!
Analog modulated channel measurement time is increased up to 1 sec.

v14.0.0.8 of 17.03.2015

Trouble-free operating reliability improved: in case of long-term monitoring device may restart or reach a deadlock sometimes
SNMP operating error fixed: memory error may appear in rare cases
Device configuring console error fixed: redundant information may appear on the screen during the measuring
NOTE! When the device automatically restarts on unknown fault, it forms the technical report and save it to the non-volatile memory. The report can be saved to file with ViewRSA software (v2.1.18 or higher) clicking on the corresponding message in the "Log" tab. It can help manufacturer to analyze and fix the fault in the shortest possible time.

 

v14.0.0.7 from 14.02.2013

CIU-003 hardware modification 2.14.2 support added: analog channel audio broadcasting (mono) monitoring implemented
 

v14.0.0.6 from 12.10.2012

TCP connection attempts time interval increased to 5 sec
BER measurement results limit at 1.0E-9

v14.0.0.5 from 07.08.2012

LAN connection functionality improved: it is possible to work in distributed networks with NAT (Network Address Translation), with setting ViewRSA server IP-address and port (command "set server" in configuration terminal)

v14.0.0.4 from 12.07.2012

Initial revision